My 36 element 23cm Dual antenna from Antennas and Amplifiers works very well but suffers badly in the salty air blowing off the North Sea just 2 miles away. I bought it in May 2021 and by January 2023 the steel parts were rusting, though of course the boom and elements are aluminium alloy and remain in good condition up to today.
![]() |
| Bubbling under the coating on the 36 element Dual in January 2023 |
The solution I hit upon was to take it apart completely (36 bolts), clean the coating and rust off the steel parts, coat them with Hammerite paint, and then put it back together again (36 bolts). Lovely job. Cleaning the metalwork involved using wire brushes on an electric drill, just the sort of thing I do not want to do. So it took ages, not because it was really that hard, but mostly because I did not want to do it in the first place.
I am not the only person with this problem. I have heard reports of these parts rusting on other Dual antennas. I have also heard that Duals now come with stainless steel parts, apart from the boom and elements of course. Until I have seen it for myself I shall reserve judgement on that.
Eventually it got so disreputable looking that I decided I had to get stuck in.
![]() |
| Central section of the 36 element Dual partly completed |
You may be wondering why I used green Hammerite. Answer: because that was the colour I could get. It should not affect the radiation pattern much.
This is not a long term solution. The Hammerite will not last too long either.
In the meantime I fell back on my reserve 23cm antenna, the 28 element Wimo:-
![]() |
| 28 element Wimo |
The Dual is now finished and back up. It looks a lot better than the Wimo and gains me those extra 2dB.
![]() |
| 36 element Dual restored |
I wonder where I will be able to work on 23cms now that this antenna has been restored and replaced on the mast?
73 Jim
GM4FVM




No comments:
Post a Comment